← Back to Products
    Fatty Acids & Distillates

    Palm Stearic Acid

    Palm Stearic Acid – Fatty Acids & Distillates product from Bio Green Oleo

    About This Product

    Commercial stearic acid derived from palm is a mixture rather than a single compound, and understanding that is essential to buying it correctly. It is produced by splitting palm oil or palm stearin into free fatty acids, then separating the saturated fraction, which is predominantly palmitic acid at sixteen carbons and stearic acid at eighteen. It is supplied as flakes, beads, powder or blocks.

    Grades are identified by the ratio between those two acids, and conventionally by titre, the solidification temperature of the melted acid. A 40:60 grade holds roughly 40 percent palmitic to 60 percent stearic; 50:50 is the most widely traded; triple-pressed denotes a more thoroughly separated and lighter-coloured material. Because stearic acid melts about 8 degrees higher than palmitic, titre rises with the stearic fraction, and so does the hardness of the finished product. This is not a commercial nicety: a candle blend, a rubber compound and a cosmetic cream each need a different titre, and substituting one grade changes set point, hardness and appearance. Full saturation gives all grades good oxidative stability.

    It is used in rubber vulcanisation as an activator, in PVC and polyolefin processing as a lubricant and stabiliser, in candles, in cosmetic creams and stick products, in soap, and in metal soap manufacture.

    Bio Green Oleo supplies palm stearic acid grades to specification on titre, chain distribution, iodine value, acid and saponification value, colour and moisture.

    Specifications

    CAS No.57-11-4 (stearic acid); 67701-03-5 (fatty acids, C16–18)
    Acid value (typical)205–212 mg KOH/g (triple pressed)
    Saponification value (typical)206–213 mg KOH/g (triple pressed)
    Iodine value (typical)≤ 1 g I₂/100 g (triple pressed, often ≤ 0.5); up to about 8 (single pressed)
    Titre (typical)54–56 °C (triple pressed)
    C16 / C18 content (typical)C16 50–60%, C18 40–50% (common triple-pressed grades)
    Colour (typical)Near white for triple pressed; limit agreed on Lovibond or APHA scale
    Trade codes1801, 1838 and 1842 are trade conventions, not a standard; confirmed by specification
    Physical formBeads, flakes or powder; molten for large-volume users

    Applications

    Rubber vulcanisation activator and processing aidPVC and polyolefin lubricant and release agentCalcium and zinc stearate productionCreams, lotions and shaving productsCandle hardening, opacity and mould releaseBar soap hardness and lather stabilityLubricants, greases and textile auxiliaries

    Frequently Asked Questions

    6 questions answered — origins, specs, applications & more

    Indicative price: $1.00–8.50/kg

    Indicative bulk guide only. Prices are market-linked and updated regularly - please request a quote for current pricing and volume rates.

    Start with the process and specification

    • End use and required material or feedstock
    • Critical analytical limits and physical form
    • Handling temperature, storage and pack format
    • Volume, documentation needs and delivery destination
    Discuss your requirement

    Confirm the evidence before ordering

    Grade, origin and certification are confirmed for each proposed source. A vegetable-derived feedstock is not automatically certified sustainable, pharmaceutical grade or suitable for every application; request the evidence needed for your intended use.

    Product illustrations show representative material and packaging. The quotation confirms the actual source, grade, pack size and labelling.

    Review documentation